博碩士論文 etd-0114116-150700 詳細資訊


姓名 吳國睿 (Kuo-Jui Wu) 電子信箱 turtle66x@hotmail.com
學號 D10101011 論文著作權 作者與指導教授共同擁有
系所名稱(中) 工業管理系 系所名稱(英) Department of Industrial Management
學年度 / 學期 104學年度第1學期 學位 博士 (Ph.D.)
論文名稱(中) 在不確定性下引導綠色時代朝向可持續供應鏈管理
論文名稱(英) Leading Green Era to Sustainable Supply Chain Management under Uncertainty
檔案 本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 校內立即公開、校外立即公開
論文種類 博士論文
論文語文別 / 頁數 英文 / 154
統計 已被瀏覽 127 次,被下載 25 次
關鍵字(中)
  • 供應鏈風險與不確定性
  • 可持續商業管理能力與競爭力
  • 動態化組織能力
  • 可持續供應鏈管理
  • 綠色供應鏈
  • 關鍵字(英)
  • supply chain risks and uncertainties
  • sustainable business management capabilities and
  • dynamic organizational capabilities
  • sustainable supply chain management
  • green supply chain
  • 摘要(中) 為使人類之生活環境不再日益惡化,聯合國、歐盟與美國分別制定了許多抑制環境惡化之相關法令,嚴格要求企業須遵循其規範,並加強落實於生產流程中,以降低對環境上之負面影響。雖然在以往之研究架構中,多數研究能夠提出適當之評估方式,藉以協助企業減緩從經濟發展上對環境層面所造成之衝擊;然而在現今社會中仍隱藏著許多不確定性,因此衍伸出許多不同層面上之議題,而諸如此類之議題無法利用以往之研究架構與方法做較為深入之探討。尤其是缺乏相關之實證與具體研究,以明確指出該如何引導企業從『綠色時代』轉變至『可持續供應鏈管理』,同時兼顧經濟、環境與社會之三重底線。
    本論文提出五個研究目的,加強論證以引導企業建立可持續性之永續經營能力,並透過以上整合能力協助企業從『綠色』轉型為『可持續』之經營管理。首先,由實行綠色供應鏈開始評估,從評估中將實行之效果予以量化,並透過量化結果尋找出最有影響力之關鍵因素。第二,評估企業執行綠色創新上之具體表現,辨別企業內部是否存在有哪些特殊之動態組織化能力,足以支持及強化企業面對大環境之變動。其次為,探討在不確定性下之創新因子,對於可持續商業管理能力與競爭力之貢獻與影響。緊接著建立一個有理論基礎之評估方式,透過不同資訊整合,協助企業辨別供應鏈上之風險與不確定性,並提高對該風險與不確定性之認知。最後,提供企業足以評估可持續供應鏈管理績效之工具,促使企業能更有效率地利用有限之資源。本論文提供創新之混合評估模式,用以提高評估結果之準確性與可靠度,並克服先前研究所產生之難題。個案探討、意涵與結論將在本文中作深入之探討。
    摘要(英) United Nations, European Union and United States of America set up several environmental regulations in order to prevent our living environment from getting worst. Hence, firms are required to comply with these regulations in the production processes for reducing the environmental impacts. Although previous studies proposed frameworks and assessments enable to assist firms in considering economic and environmental aspects, there is still a gap exist in concerns about the social aspect. Furthermore, there are also insufficient studies address how to lead firms from green era to sustainable supply chain management that enables to consider triple bottle line (economy, environment and society) simultaneously.
    This dissertation proposes five research objectives to demonstrate the development of sustainability for leading firms from “green” into “sustainability”: (i) to evaluate the decisive factors that can influence the implementation of green supply chain practices; (ii) to identify the specific dynamic organizational capabilities by evaluating the performance of the case firm; (iii) to investigate the contributions of innovation criteria to sustainable business management capabilities and competencies under uncertainty; (iv) to develop an assessment with a theoretical basis that supports firms in diagnosing and enhancing their understanding of supply chain risks and uncertainties using diverse information; and (v) to provide, in addition to a theoretical basis, a quantitative tool for firms to evaluate the performance of sustainable supply chain management. In addition, several effective hybrid methods are proposed to overcome the gaps from previous studies. The empirical studies, implication and conclusions are addressed.
    論文目次 CHINESE ABSTRACT i
    ENGLISH ABSTRACT ii
    ACKNOWLEDGEMENTS iii
    TABLE OF CONTENTS iv
    LIST OF FIGURES vii
    LIST OF TABLES viii
    CHAPTER 1 INTRODUCTION 1
    1.1. Phenomenon 1
    1.2. Research objectives 3
    1.3. Structure of dissertation 4
    CHAPTER 2 LITERATURE REVIEW 6
    2.1. Green supply chain practice 6
    2.1.1. Eco-innovation 8
    2.1.2. Innovation 10
    2.1.3. Dynamic organization capability 10
    2.1.4. Sustainable business management capabilities and competencies 12
    2.1.5. Supply chain risks and uncertainties 13
    2.1.6. Sustainability indicators 14
    2.2. Sustainable supply chain management 15
    CHAPTER 3 METHODS 17
    3.1. Fuzzy Delphi Method (FDM) 17
    3.2. Fuzzy Decision Making Trial and Evaluation Laboratory (FDEMATEL) 18
    3.3. Grey Delphi Method (GDM) 19
    3.4. Grey Decision Making Trial and Evaluation Laboratory (GDEMATEL) 20
    3.5. Interval Triangular Fuzzy Numbers associated with Grey Relational Analysis (IVTFNs-GRA) 21
    CHAPTER 4 EMPIRICAL STUDIES 26
    4.1. GSCP evaluation 26
    4.1.1. Proposed GSCP criteria 28
    4.1.2. Proposed FDEMATEL approach 30
    4.1.3. Procedures of FDEMATEL 32
    4.1.4. Empirical results 33
    4.1.4.1. Case information 33
    4.1.4.2. Case analysis 35
    4.2. DOC identification 38
    4.2.1. Assumption for the analysis 39
    4.2.1.1. The research gaps 39
    4.2.1.2. The proposed measures 41
    4.2.2. Proposed analytical steps 45
    4.2.3. Results 46
    4.2.3.1. Taiwanese lighting industry 46
    4.2.3.2. Empirical results 47
    4.3. SBMCC investigation 61
    4.3.1. Proposed method 62
    4.3.2. Proposed SBMCC measures 63
    4.3.3. Proposed analytical steps 66
    4.3.4. Results 67
    4.3.4.1. Industrial background 67
    4.3.4.2. The empirical results 68
    4.4. SCRU diagonsis 83
    4.4.1. Collaboration Theory 84
    4.4.2. Rationale of study 85
    4.4.2.1. The study gaps 85
    4.4.2.2. The Proposed Measures 86
    4.4.3. Data Gathering 89
    4.4.3.1. Qualitative Data 89
    4.4.3.2. Social Media 89
    4.4.3.3. Quantitative Data 90
    4.4.4. Proposed Analytic Procedures 91
    4.4.5. Empirical Results 93
    4.4.5.1. Industrial Background 93
    4.4.5.2. Results 93
    4.5. SSCM assessment 99
    4.5.1. The proposed method 101
    4.5.2. The proposed SSCM measures 102
    4.5.3. Proposed analytical procedures 104
    4.5.4. Results 105
    4.5.4.1. Case information 105
    4.5.4.2. The results 106
    CHAPTER 5 IMPLICATIONS 110
    5.1. Theoretical Implications 110
    5.1.1. DOC 110
    5.1.2. SBMCC 111
    5.1.3. SCRU 112
    5.1.4. SSCM 113
    5.2. Managerial Implications 115
    5.2.1. GSCP implementation 115
    5.2.2. Eco-innovation Application 117
    5.2.3. Adoption of innovation 118
    5.2.4. SCRU identification and mitigation 121
    5.2.5. SSCM evaluation 122
    CHAPTER 6 CONCLUSIONS AND FUTURE STUDIES 124
    6.1. Conclusions 124
    6.1.1. Industry/Firm 124
    6.1.2. Theory 126
    6.1.3. Method 127
    6.2. Future Studies 128
    REFERENCES 129
    參考文獻 Abdallah, T., Diabat, A., & Rigter, J. (2013). Investigating the option of installing small scale PVs on facility rooftops in a green supply chain. International Journal of Production Economics, 146, 465-477.
    Abdallah, T., Farhat, A., Diabat, A., & Kennedy, S. (2012). Green supply chains with carbon trading and environmental sourcing: Formulation and life cycle assessment. Applied Mathematical Modelling, 36, 4271-4285.
    Ageron, B., Gunasekaran, A. & Spalanzani, A. (2012). Sustainable supply management: An empirical study. International Journal of Production Economics, 140, 168-182.
    Ahi, P. & Searcy, C. (2013). A comparative literature analysis of definitions for green and sustainable supply chain management. Journal of Cleaner Production, 52, 329-341.
    Alegre, J. & Chiva, R. (2008). Assessing the impact of organizational learning capability on product innovation performance: An empirical test. Technovation, 28, 315-326.
    Aragon-Correa, J. A. & Sharma, S. (2003). A contingent resource-based view of proactive corporate environmental strategy. Academy of Management Review, 28, 71-88.
    Ashby, A., Leat, M. & Hudson-Smith, M. (2012). Making connections: A review of supply chain management and sustainability literature. Supply Chain Management: An International Journal, 17, 497-516.
    Atwater, C., Gopalan, R., Lancioni, R., & Hunt, J. (2014). Measuring supply chain risk: Predicting motor carriers’ ability to withstand disruptive environmental change using conjoint analysis. Transportation Research Part C: Emerging Technologies, 48, 360-378.
    Awasthi, A., Chauhan, S. S., & Goyal, S. (2010). A fuzzy multicriteria approach for evaluating environmental performance of suppliers. International Journal of Production Economics, 126, 370-378.
    Azapagic, A. (2004). Developing a framework for sustainable development indicators for the mining and minerals industry. Journal of Cleaner Production, 12, 639-662.
    Badawy, M. K. (1993). Management as a new technology. Computers in Industry, 23, 153.
    Badurdeen, F., Iyengar, D., Goldsby, T., Metta, H., Gupta, S. & Jawahir, I. (2009). Extending total life-cycle thinking to sustainable supply chain design. International Journal of Product Lifecycle Management, 4, 49-67.
    Baležentis, T. & Zeng, S. (2013). Group multi-criteria decision making based upon interval-valued fuzzy numbers: An extension of the MULTIMOORA method. Expert Systems with Applications, 40, 543-550.
    Barreto, I. (2010). Dynamic Capabilities: A review of past research and an agenda for the future. Journal of Management, 36, 256-280.
    Bask, A., & Kuula, M. (2011). Measuring supply chain level environmental sustainability - Case Nokia. International Journal of Business Insights and Transformation, 3, 16-24.
    Becker, W. & Dietz, J. (2004). R&D cooperation and innovation activities of firms - evidence for the German manufacturing industry. Research Policy, 33, 209-223.
    Belaud, J.-P., Negny, S., Dupros, F., Michéa, D., & Vautrin, B. (2014). Collaborative simulation and scientific big data analysis: Illustration for sustainability in natural hazards management and chemical process engineering. Computers in Industry, 65, 521-535.
    Bereketli, İ., Genevois, M., & Ulukan, H. (2009). Green product design for mobile phones. World Academy of Science, Engineering and Technology, 3, 213-217.
    Beske, P. (2012). Dynamic capabilities and sustainable supply chain management. International Journal of Physical Distribution & Logistics Management, 42, 372-387.
    Beske, P., Land, A. & Seuring, S. (2014). Sustainable supply chain management practices and dynamic capabilities in the food industry: A critical analysis of the literature. International Journal of Production Economics, 152, 131-143.
    Bhattacharyya, K., Datta, P., & Offodile, O. F. (2010). The contribution of third-party indices in assessing global operational risks. Journal of Supply Chain Management, 46, 25-43.
    Bhattacharyya, R. (2015). A Grey Theory based multiple attribute approach for r&d project portfolio selection. Fuzzy Information and Engineering, 7, 211-225.
    Birkinshaw, J., Hamel, G., & Mol, M. J. (2008). Management innovation. Academy of Management Review, 33, 825-845.
    Blancas, F. J., Lozano-Oyola, M., González, M., Guerrero, F. M., & Caballero, R. (2011). How to use sustainability indicators for tourism planning: The case of rural tourism in Andalusia (Spain). Science of the Total Environment, 412, 28-45.
    Bocken, N. M. P., Farracho, M., Bosworth, R. & Kemp, R. (2014). The front-end of eco-innovation for eco-innovative small and medium sized companies. Journal of Engineering and Technology Management, 31, 43-57.
    Bodhani, A., (2012). Shops offer the e-tail experience. Engineering and Technology, 7, 46-49.
    Bodin, Ö. & Crona, B.I., (2009). The role of social networks in natural resource governance: What relationship patterns make a difference? Global Environment Change, 19, 366-374.
    Böhringer, C., & Jochem, P. E. P. (2007). Measuring the immeasurable - A survey of sustainability indices. Ecological Economics, 63, 1-8.
    Bontis, N., Crossan, M. & Hulland, J. (2002). Managing organizational learning systems by aligning stocks and flows. Journal of Management Studies, 39, 437-469.
    Boons, F. & Wagner, M. (2009). Assessing the relationship between economic and ecological performance: Distinguishing system levels and the role of innovation. Ecological Economics, 68, 1908-1914.
    Boons, F. A. A., & Lüdeke-Freund, F. (2013). Business models for sustainable innovation: State-of-the-art and steps towards a research agenda. Journal of Cleaner Production, 45, 9-19.
    Brand, F. (2009). Critical natural capital revisited: Ecological resilience and sustainable development. Ecological Economics, 68, 605-612.
    Brandenburg, M., Govindan, K., Sarkis, J. & Seuring, S. (2014). Quantitative models for sustainable supply chain management: Developments and directions. European Journal of Operational Research, 233, 299-312.
    Briassoulis, H. (2001). Sustainable development and its indicators: Through a (planner’s) glass darkly. Journal of Environmental Planning and Management, 44, 409-427.
    Brindley, C. & Oxborrow, L. (2014). Aligning the sustainable supply chain to green marketing needs: A case study. Industrial Marketing Management, 43, 45-55.
    Brockmand, B. & Morgan F. (2003). The role of existing knowledge in new product innovativeness and performance. Decision Sciences, 32, 385-419.
    Brodin, E. M. (2014). The critical and creative thinking. nexus: Learning experiences of doctoral students. Studies in Higher Education, 1-19.
    Bulte, E. H., & Soest, D. P. (2001). Environmental degradation in developing countries: Households and the (reverse) environmental kuznets curve. Journal of Development Economics, 65, 225-235.
    Burgelman, R. A. & Maidique, M. A. (1988). Strategic management of technology and innovation. Homewood, Illinois: Irwin.
    Büyüközkan, G. & Çifçi, G. (2013). An integrated QFD framework with multiple formatted and incomplete preferences: A sustainable supply chain application. Applied Soft Computing, 13, 3931-3941.
    Byrne, P. M. (2007). Impact and ubiquity: Two reasons to proactively manage risk. Logistics Management, 46, 24-25.
    Cai, W.-g. & Zhou, X.-l. (2014). On the drivers of eco-innovation: Empirical evidence from China. Journal of Cleaner Production, 79, 239-248.
    Camison, C. & Monfort-Mir, V. M. (2012). Measuring innovation in tourism from the Schumpeterian and the dynamic-capabilities perspectives. Tourism Management, 33, 776-789.
    Campion, M. A., Fink, A. A., Ruggeberg, B. J., Carr, L., Phillips, G. M. & Odman, R.B. (2011). Doing competencies well: Best practices in competency modelling. Personnel Psychology, 64, 225-262.
    Carbajal-Hernández, J., Sánchez-Fernández, L., Carrasco-Ochoa, J., & Martínez-Trinidad, J. (2012). Assessment and prediction of air quality using fuzzy logic and autoregressive models. Atmospheric Environment, 60, 37-50.
    Carrillo-Hermosilla, J., del Rio, P. & Konnola, T. (2010). Diversity of eco-innovations: Reflections from selected case studies. Journal of Cleaner Production, 18, 1073-1083.
    Carter, C. R., & Jennings, M. M. (2002). Social responsibility and supply chain relationships. Transportation Research Part E: Logistics and Transportation Review, 38, 37-52.
    Carter, C. R., & Rogers, D. S. (2008). A framework of sustainable supply chain management: Moving toward new theory. International Journal of Physical Distribution & Logistics Management, 38, 360-387.
    Carter, R. & Easton, P. (2011). Sustainable supply chain management: Evolution and future directions. International Journal of Physical Distribution and Logistics, 41, 46-62.
    Chan, H. K., Wang, X., Lacka, E., & Zhang, M. (2015). A mixed-method approach to extracting the value of social media data. Production and Operations Management, In press.
    Chang, B., Chang, C.-W. & Wu, C.-H. (2011). Fuzzy DEMATEL method for developing supplier selection criteria. Expert Systems with Applications, 38, 1850-1858.
    Chang, Y. C., Chang, H. T., Chi, H. R., Chen, M. H. & Deng, L. L. (2012). How do established firms improve radical innovation performance? The organizational capabilities view. Journal of Technovation, 32, 441-451.
    Chen, C.-L. & Jaw, Y.-L. (2009). Building global dynamic capabilities through innovation: A case study of Taiwan's cultural organizations. Journal of Engineering and Technology Management, 26, 247-263.
    Chen, F. & Ou, T. (2009). Gray relation analysis and multilayer functional link network sales forecasting model for perishable food in convenience store. Expert Systems with Applications, 36, 7054-7063.
    Chen, J. S., Tsou, H. T., Huang & Y. H. (2009). Service delivery innovation: Antecedents and impact on firm performance. Journal of Service Research, 12, 36- 55.
    Chen, J., Sohal, A. S., & Prajogo, D. I. (2012). Supply chain operational risk mitigation: A collaborative approach. International Journal of Production Research, 51, 2186-2199.
    Chen, M. H. (2010). The economy, tourism growth and corporate performance in the Taiwanese hotel industry. Tourism Management, 31, 665-675.
    Chen, R.-H., Lin, Y., & Tseng, M.-L. (2014). Multi-criteria analysis of sustainable development indicators in the construction minerals industry in China. Resources Policy, in press.
    Chen, R.-S., Sun, C.-M., Helms, M. M. & Jih, W.-J. (2008). Aligning information technology and business strategy with a dynamic capabilities perspective: A longitudinal study of a Taiwanese Semiconductor Company. International Journal of Information Management, 28, 366-378.
    Cheng, C. C. & Shiu, E. C. (2012). Validation of a proposed instrument for measuring eco-innovation: An implementation perspective. Technovation, 32, 329-344.
    Cheng, C. C. J., Yang, C.-L. & Sheu, C. (2014). The link between eco-innovation and business performance: A Taiwanese industry context. Journal of Cleaner Production, 64, 81-90.
    Cheng, C.-H., & Lin, Y. (2002). Evaluating the best main battle tank using fuzzy decision theory with linguistic criteria evaluation. European Journal of Operational Research, 142, 174-186.
    Chien, M., & Shih, L. (2007). An empirical study of the implementation of green supply chain management practices in the electrical and electronic industry and their relation to organizational performances. International Journal of Environmental Science and Technology, 4, 383-394.
    Chiu, M.-C., & Chu, C.-H. (2012). Review of sustainable product design from life cycle perspectives. International Journal of Precision Engineering and Manufacturing, 13, 1259-1272.
    Choi, H. C., & Sirakaya, E. (2006). Sustainability indicators for managing community tourism. Tourism Management, 27, 1274-1289.
    Chopra, S., & Sodhi, M. S. (2004). Managing risk to avoid supply-chain breakdown. MIT Sloan Management Review, 46, 53-61.
    Chou, J.-R. (2014). An ARIZ-based life cycle engineering model for eco-design. Journal of Cleaner Production, 66, 201-223.
    Christiansen, A., Prescott, T. & Ball, J. (2014). Learning in action: Developing safety improvement capabilities through action learning. Nurse Education Today, 34, 243-247.
    Chuang, H.-M., Lin, C.-K., Chen, D.-R., & Chen, Y.-S. (2013). Evolving MCDM applications using hybrid expert-based ism and dematel models: An example of sustainable ecotourism. The Scientific World Journal, 2013, 1-18.
    Clarke, S. & Roome N. J. (1999). Sustainable business: Learning-action networks as organizational assets. Business Strategy and the Environment, 8, 296-310.
    Closs, D., Speier, C. & Meacham, N. (2011). Sustainability to support end-to-end value chains: The role of supply chain management. Journal of the Academy of Marketing Science, 39, 101-116.
    Colquitt, J. A., Scott, B. A., & LePine, J. A. (2007). Trust, trustworthiness, and trust propensity: A meta-analytic test of their unique relationships with risk-taking and job performance. Journal of Applied Psychology, 92, 909-927.
    Colvin, W., Lyden, S., & Barra, B.A.L. (2013). Attracting girls to civil engineering through hands-on activities that reveal the communal goals and values of the profession. Journal of Leadership and Management in Engineering, 13, 35-41.
    Cornelis, C., Deschrijver, G. & Kerre, E. (2006). Advances and challenges in interval-valued fuzzy logic. Fuzzy Sets and Systems, 157, 622-627.
    Dahlsrud, A. (2008). How corporate social responsibility is defined: An analysis of 37 definitions. Corporate Social Responsibility and Environmental Management, 15, 1-13.
    Dalalah, D., Hayajneh, M., & Batieha, F. (2011). A fuzzy multi-criteria decision making model for supplier selection. Expert Systems with Applications, 38, 8384-8391.
    Damanpour, F. & Evan, W. M. (1984). Organizational innovation and performance: The problem of “organizational lag.” Administrative Science Quarterly, 392-409.
    Damanpour, F. (2010). An integration of research findings of effects of firm size and market competition on product and process innovations. British Journal of Management, 21, 996 -1010.
    D'Amato, A., & Roome, N. (2009). Leadership of organizational change toward an integrated model of leadership for corporate responsibility and sustainable development: A process model of corporate responsibility beyond management innovation. Corporate Governance, 9, 421-434.
    Daniel, E. M. & Wilson, H. N. (2003). The role of dynamic capabilities in e-business transformation. European Journal of Information Systems, 12, 282-296.
    Daniel, E. M., Ward, J. M. & Franken, A. (2014). A dynamic capabilities perspective of IS project portfolio management. Journal of Strategic Information Systems, 23, 95-111.
    de Araujo, J., & de Oliveira, J. (2012). Evaluation of two competing machining processes based on sustainability indicators. Leveraging technology for a sustainable world, Springer Berlin Heidelberg, 317-322.
    Delbard, O. (2008). CSR legislation in France and the European regulatory paradox: An analysis of EU CSR policy and sustainability reporting practice. Corporate Governance, 8, 397-405.
    Delgado, M., Porter, M.E. & Stern, S. (2010). Clusters and entrepreneurship. Journal of Economic Geography, 10, 495-518.
    Delgado-Verde, M., Martín-de Castro, G. & Navas-López, J.E. (2011) Organizational knowledge assets and innovation capability: Evidence from Spanish manufacturing firms. Journal of Intellectual Capital, 12, 5-19.
    Den Hertog, P. (2000). Knowledge-intensive business services as co-producers of innovation. International Journal of Innovation Management, 4, 491-528.
    Deng, J.L. (1982). Control problems of grey systems. System and Control Letter, 1, 288-294.
    Deng, J.L. (1989). Introduction to grey system theory. The Journal of Grey System, 1, 1-24.
    Diabat, A., & Govindan, K. (2011). An analysis of the drivers affecting the implementation of green supply chain management. Resources, Conservation and Recycling, 55, 659-667.
    Dixon, S., Meyer, K. & Day, M. (2014). Building dynamic capabilities of adaptation and innovation: A study of micro-foundations in a transition economy. Long Range Planning, 47, 186-205.
    Dong, Y., Wang, X., Jin, J., Qiao, Y. & Shi, L. (2014). Effects of eco-innovation typology on its performance: Empirical evidence from Chinese enterprises. Journal of Engineering and Technology Management, 34, 78-98.
    Doppelt, B. (2010). Leading change toward sustainability: A change-management guide for business, government and civil society (2nd Edition ed.). Greenleaf Publishing.
    Drnevich, P. L. & Kriauciunas, A. P. (2011). Clarifying the conditions and limits of the contributions of ordinary and dynamic capabilities to relative firm performance. Strategic Management Journal, 32, 254-279.
    Duckham, M., Mason, K., Stell, J., & Worboys, M. (2001). A formal approach to imperfection in geographic information. Computers, Environment and Urban Systems, 25, 89-103.
    Dües, C., Tan, K., & Lim, M. (2013). Green as the new Lean: How to use Lean practices as a catalyst to greening your supply chain. Journal of Cleaner Production, 40, 93-100.
    Dutta, S., Narasimhan, O. & Rajiv, S. (2005). Conceptualizing and measuring capabilities: Methodology and empirical application. Strategic Management Journal, 26, 277-285.
    Dyllick, T. & Hockerts, K. (2002). Beyond the business case for corporate sustainability. Business Strategy and the Environment, 11, 130-41.
    Dytczak, M., & Ginda , G. (2013). Is explicit processing of fuzzy direct influence evaluations in DEMATEL indispensable? Expert Systems with Applications, 40, 5027-5032.
    Easterby-Smith, M., Lyles, M. A. & Peteraf, M. A. (2009). Dynamic capabilities: Current debates and future directions. British Journal of Management, 20, S1-S8.
    Edquist, C. (1997). Systems of innovation approaches - Their emergence and characteristics. In Edquist, C. (Edition), Systems of innovation - Technologies, institutions and organizations, London: Pinter Publishers/Cassell Academic, 1-35.
    Eisenhardt, K. M. & Martin, J. A. (2000). Dynamic capabilities: What are they? Strategic Management Journal, 21, 1105-1121.
    Ellis, S. C., Shockley, J., & Henry, R. M. (2011). Making sense of supply disruption risk research: A conceptual framework grounded in enactment theory. Journal of Supply Chain Management, 47, 65-96.
    Ellonen, H.-K., Wikström, P. & Jantunen, A. (2009). Linking dynamic-capability portfolios and innovation outcomes. Technovation, 29, 753-762.
    Eltayeb, T., Zailani, S., & Ramayah, T. (2011). Green supply chain initiatives among certified companies in Malaysia and environmental sustainability: Investigating the outcomes. Resources, Conservation and Recycling, 55, 495-506.
    Enarsson, L. (1998). Evaluation of suppliers: How to consider the environment. International Journal of Physical Distribution & Logistics Management, 28, 5-17.
    Erol, I., Sencer, S., & Sari, R. (2011). A new fuzzy multi-criteria framework for measuring sustainability performance of a supply chain. Ecological Economics, 70, 1088-1100.
    Erzurumlu, S. S. & Erzurumlu, Y. O. (2014). Sustainable mining development with community using design thinking and multi-criteria decision analysis. Resources Policy, in press.
    Esquer-Peralta, J. (2007). Sustainability management systems (SMS): An integrative approach to management systems towards sustainable development, PhD Dissertation. University of Massachusetts Lowell, USA.
    Esteves, A. M., Franks, D., & Vanclay, F. (2012). Social impact assessment: The state of the art. Impact Assessment and Project Appraisal, 30, 34-42.
    European Commission. (2001). Sustainable production, challenges and objectives for EU research policy. Report of the expert group on competitive and sustainable production & related service industries in Europe in the period to 2020, EUR19880, Brussel.
    Faucheux, S. & Nicolaï, I. (2011). IT for green and green IT: A proposed typology of eco-innovation. Ecological Economics, 70, 2020-2027.
    Feiler, P. & Teece, D. (2014). Case study, dynamic capabilities and upstream strategy: Supermajor EXP. Energy Strategy Reviews, 3, 14-20.
    Fiksel, J. (2010). Evaluating supply chain sustainability. Chemical Engineering Progress, 106, 28-38.
    Finin, T., Ding, L. & Zou, L. (2005). Social networking on the semantic web. The Learning Organization, 12, 418-417.
    Francas, D., & Minner, S. (2009). Manufacturing network configuration in supply chains with product recovery. Omega, 37, 757-769.
    Galende, J. & De la Fuente, J. M. (2003). Internal factors determining a firm's innovative behavior. Research Policy, 32, 715-736.
    Gan, L. (2003). Globalization of the automobile industry in China: Dynamics and barriers in greening of the road transportation. Energy Policy, 31, 537-551.
    García-Rodríguez, F. J., Castilla-Gutiérrez, C. & Bustos-Flores, C. (2013). Implementation of reverse logistics as a sustainable tool for raw material purchasing in developing countries: The case of Venezuela. International Journal of Production Economics, 141, 582-592.
    Gebauer, H., Gustafsson, A. & Witell, L. (2011). Competitive advantage though service differentiation by manufacturing companies. Journal of Business Research 64, 1270-1280.
    Ghadge, A., Dani, S., & Kalawsky, R. (2012). Supply chain risk management: Present and future scope. The International Journal of Logistics Management, 23, 313-339.
    Global Reporting Initiative (GRI). (2011). GRI and ISO 26000: How to use the GRI guidelines in conjunction with ISO 26000. Design. Retrieved from: http://www.esglobal.com/gri/files/isogrireport.pdf
    Gold, S., Hahn, R. & Seuring, S. (2013). Sustainable supply chain management in “Base of the Pyramid” food projects - A path to triple bottom line approaches for multinationals? International Business Review, 22, 784-799.
    Gold, S., Seuring, S. & Beske, P. (2010). The constructs of sustainable supply chain management - A content analysis based on published case studies. Progress in Industrial Ecology, 7, 114-137.
    Gopalakrishnan, K., Yusuf, Y. Y., Mus, A., Abubakar, T. & Ambursa, H. M. (2012). Sustainable supply chain management: A case study of British Aerospace (BAe) Systems. International Journal of Production Economics, 140, 193-203.
    Govindan, K., Kaliyan, M., Kannan, D. & Haq, A. (2014). Barriers analysis for green supply chain management implementation in indian industries using analytic hierarchy process. International Journal of Production Economics, 147, 555-568.
    Gray, B. (1985). Conditions facilitating interorganizational collaboration. Human Relations, 38, 911-936.
    Grissemann, U. S., Pikkemaat, B., & Weger, C. (2013). Antecedents of innovation activities in tourism: An empirical investigation of the Alpine hospitality industry. Tourism, 61, 7-27
    Grissemann, U. S., Plank, A. & Brunner-Sperdin, A. (2013). Enhancing business performance of hotels: The role of innovation and customer orientation. International Journal of Hospitality Management, 33, 347-356.
    Gu, H., Ryan, C., & Yu, L. (2012). The changing structure of the Chinese hotel industry: 1980-2012. Tourism Management Perspective, 4, 56-63.
    Hallikas, J., Karvonen, I., Urho, P., Veli-Matti, V., Markku, T. (2004). Risk management processes in supplier networks. International Journal of Production Economics, 90, 47-58.
    Hallstedt, S.I., Thompson, A.W. & Lindahl, P. (2013). Key elements for implementing a strategic sustainability perspective in the product innovation process. Journal of Cleaner Production, 51, 277- 288.
    Hamel, G. (2006). The why, what and how of management innovation. Harvard Business Review, 84, 72- 84.
    Hansen, E. G., Grosse-Dunker, F. & Reichwald, R. (2009). Sustainability innovation cube - A framework to evaluate sustainability-oriented innovations. International Journal of Innovation Management, 13, 683- 713.
    Harper, S.M. & Becker, S.W. (2004). On the leading edge of innovation: A comparative study of innovation practices. Southern Business Review, 29, 1-15.
    Hassini, E., Surti, C. & Searcy, C. (2012). A literature review and a case study of sustainable supply chains with a focus on metrics. International Journal of Production Economics, 140, 69-82.
    Hauer, M. L. (2003). Risk-adjusted supply chain management. Supply Chain Management Review, 7, 64-71.
    Hecker, A., & Ganter, A. (2013). The influence of product market competition on technological and management innovation: Firm-level evidence from a large scale survey. European Management Review, 10, 17-33.
    Heckmann, I., Comes, T., & Nickel, S. (2015). A critical review on supply chain risk - definition, measure and modeling. Omega, 52, 119-132.
    Helbing, D., Ammoser, H., & Kühnert, C. (2006). Disasters as extreme events and the importance of network interactions for disaster response management. Extreme Events in Nature and Society SE15, Springer Berlin Heidelberg, 319-348.
    Helfat, C. E. & Peteraf, M. A. (2003). The dynamic resource-based view: Capability lifecycles. Strategic Management Journal, 24, 997-1010.
    Helfat, C. E. & Winter, S. G. (2011). Untangling dynamic and operational capabilities: Strategy for the (n)ever-changing world. Strategic Management Journal, 32, 1243-1250.
    Helfat, C. E., Finkelstein, S., Mitchell, W., Peteraf, M., Singh, H., Teece, D. & Winter, S. G. (2006). Dynamic capabilities: Understanding strategic change in organizations: Wiley-Blackwell.
    Hienerth, C. (2006). The commercialization of user innovations: The development of the rodeo kayak industry. R&D Management, 36, 273-294.
    Hjalager, A. M. (2010). A review of innovation research in tourism. Tourism Management, 31, 1-12.
    Hoof, B. & Thiell, M. (2014). Collaboration capacity for sustainable supply chain management: Small and medium - sized enterprises in Mexico. Journal of Cleaner Production, 67, 239-248.
    Horbach, J. (2008). Determinants of environmental innovation - new evidence from German panel data sources. Research Policy, 37, 163-173.
    Horbach, J., Rammer, C. & Rennings, K. (2012). Determinants of eco-innovations by type of environmental impact - The role of regulatory push/pull, technology push and market pull. Ecological Economics, 78, 112-122.
    Hsieh, M. H. & Tsai, K. H. (2007). Technological capability, social capital and the launch strategy for innovative products. Industrial Marketing Management, 36, 493-502.
    Hsu, C. W. & Hu A. H. (2008). Green Supply Chain Management in The Electronic Industry. International Journal of Environmental Science & Technology, 5, 205-216.
    Hsu, C.-W., Kuo, T.-C., Chen, S.-H., & Hu, A. H. (2013). Using DEMATEL to develop a carbon management model of supplier selection in green supply chain management. Journal of Cleaner Production, 56, 164-172.
    Hung, R. Y. Y., Yang, B., Lien, B. Y.-H., McLean, G. N. & Kuo, Y.-M. (2010). Dynamic capability: Impact of process alignment and organizational learning culture on performance. Journal of World Business, 45, 285-294.
    Jabbour, A., Jabbour, C., Latan, H., Teixeira, A., & Oliveira, J. (2014). Quality management, environmental management maturity, green supply chain practices and green performance of Brazilian companies with ISO 14001 certification: Direct and indirect effects. Transportation Research Part E, 67, 39-51.
    Jamal, T. B. & Getz, D. (1995). Collaboration theory and community tourism planning. AnnMs of TourismResearch, 22, 186-204.
    Jantunen, A., Puumalainen, K., Saarenketo, S. & Kyläheiko, K. (2005). Entrepreneurial orientation, dynamic capabilities and international performance. Journal of International Entrepreneurship, 3, 223-243.
    Jayaraman, V., Patterson, R., & Rolland, E. (2003). The design of reverse distribution networks: Models and solution procedures. European Journal of Operational Research, 150, 128-149.
    Jiang, B., Baker, R. C., & Frazier, G. V. (2009). An analysis of job dissatisfaction and turnover to reduce global supply chain risk: Evidence from China. Journal of Operations Management, 27, 169-184.
    Jiao, H., Alon, I., Koo, C. K. & Cui, Y. (2013). When should organizational change be implemented? The moderating effect of environmental dynamism between dynamic capabilities and new venture performance. Journal of Engineering and Technology Management, 30, 188-205.
    Joham, C., Metcalfe, M. & Sastrowardoyo, S. (2009). Project conceptualization using pragmatic methods. International Journal of Project Management, 27, 787-794.
    Johannesen, J. & Olsen, B. (2009). Systemic knowledge processes, innovation and sustainable competitive advantages. Kybernetes, 38, 559-580.
    Judge, W. Q. & Elenkov, D. (2005). Organizational capacity for change and environmental performance: An empirical assessment of Bulgarian firms. Journal of Business Research, 58, 893-901.
    Kafetzopoulos, D., & Psomas, E. (2015). The impact of innovation capability on the performance of manufacturing companies: The Greek case. Journal of Manufacturing Technology Management, 26, 104-130.
    Kapsali, M. (2011). Systems thinking in innovation project management: A match that works. International Journal of Project Management, 29, 396-407
    Karakaya, E., Hidalgo, A. & Nuur, C. (2014). Diffusion of eco-innovations: A review. Renewable and Sustainable Energy Reviews, 33, 392-399.
    Karnik, N. & Mendel, J. (2001). Operations on type-2 fuzzy sets. uzzy Sets and Systems, 122, 327-348.
    Katkalo, V. S., Pitelis, C. N. & Teece, D. J. (2010). Introduction: On the nature and scope of dynamic capabilities. Industrial and Corporate Change, 19, 1175-1186.
    Kemp, R. & Pearson, P. (2008). Final report MEI project about measuring eco-innovation. Maastricht.
    Kemp, R. (2010). Eco-innovation: Definition, measurement and open research issues. Economia politica, 27, 397-420.
    Kesidou, E. & Demirel, P. (2012). On the drivers of eco-innovations: Empirical evidence from the UK. Research Policy, 41, 862-870.
    Kim, S. (2009). An investigation on the direct and indirect effect of supply chain integration on firm performance. International Journal of Production Economics, 119, 328-346.
    Kimberly, J. R. & Evanisko, M. J. (1981). Organizational innovation: The influence of individual, organizational, and contextual factors on hospital adoption of technological and administrative innovations. Academy of Management Journal, 24, 689-713.
    Kleindorfer, P. R., Belke, J. C., Elliott, M. R., Lee, K., Lowe, R. A., & Feldman, H. I. (2003). Accident epidemiology and the us chemical industry: Accident history and worst‐case data from rmp* info. Risk Analysis, 23, 865-881.
    Kline, N. (2015). More time to think: The power of independent thinking. Hachette:United Kingdom.
    Klinke, A., & Renn, O. (2002). A new approach to risk evaluation and management: Risk-based, precaution-based, and discourse-based strategies. Risk Analysis, 22, 1071-1094.
    Kneller, R. & Manderson, E. (2012). Environmental regulations and innovation activity in UK manufacturing industries. Resource and Energy Economics, 34, 211-235.
    Koch, H. (2010). Developing dynamic capabilities in electronic marketplaces: A cross-case study. The Journal of Strategic Information Systems, 19, 28-38.
    Kumar, R., & Bala Subrahmanya, M. (2010). Influence of subcontracting on innovation and economic performance of SMEs in Indian automobile industry. Technovation, 30, 558-569.
    Kuo, Y., Yang, T., & Huang, G. W. (2008). The use of grey relational analysis in solving multiple attribute decision-making problems. Computers and Industrial Engineering, 55, 80-93.
    Lai, K.-h., & Wong, C. (2012). Green logistics management and performance: Some empirical evidence from Chinese manufacturing exporters. Omega, 40, 267-282.
    Lam, K.-C., Tao, R. & Lam, M. C.-K. (2010). A material supplier selection model for property developers using Fuzzy Principal Component Analysis. Automation in Construction, 19, 608-618.
    Laney, D., (2001). 3D data management: Controlling data volume, velocity and variety. Gartner. Available at: http://blogs.gartner.com/doug-laney/files/
    Lansdown, T. C., Stephens, A. N., & Walker, G. H. (2015). Multiple driver distractions: A systemic transport problem. Accident Analysis & Prevention, 74, 360-367.
    Lawson, B. & Samson, D. (2001). Developing innovation capability in organisations: A dynamic capabilities approach. International Journal of Innovation Management, 5, 377-400.
    Leblanc, R., & Gillies, J. (2005). Inside the boardroom. Ontario: Wiley & Sons.
    Lee, A. H., Kang, H.-Y., Hsu, C.-F., & Hung, H.-C. (2009). A green supplier selection model for high-tech industry. Expert Systems with Applications, 36, 7917-7927.
    Lee, J., Lee, K. & Rho, S. (2002). An evolutionary perspective on strategic group emergence: A genetic algorithm-based model. Strategic Management Journal, 23, 727-746.
    Lee, Y.-C., Li, M.-L., Yen, T.-M., & Huang, T.-H. (2010). Analysis of adopting an integrated decision making trial and evaluation laboratory on a technology acceptance model. Expert Systems with Applications, 37, 1745–1754.
    Letki, N., & Mieriņa, I. (2015). Getting support in polarized societies: Income, social networks, and socioeconomic context. Social science research, 49, 217-233.
    Levine, M. (2002). A mind at a time: America's top learning expert shows how every child can succeed. New York, NY: Simon & Schuster.
    Li, D.-F., Wang, Y.-C., Liu, S. & Shan, F. (2009). Fractional programming methodology for multi-attribute group decision-making using IFS. Applied Soft Computing, 9, 219-225.
    Li, X., & Wang, Q. (2007). Coordination mechanisms of supply chain systems. European Journal of Operational Research, 179, 1-16.
    Liang, L., Yang, F., Cook, W., & Zhu, J. (2006). DEA models for supply chain efficiency evaluation. Annals of Operations Research, 1, 35-49.
    Liao, J., Kickul, J. R. & Ma, H. (2009). Organizational dynamic capability and innovation: An empirical examination of internet firms. Journal of Small Business Management, 47, 263-286.
    Liao, T. & Price, J. (2010). Innovation investment, market engagement and financial performance: A study among Australia manufacturing SMEs, Research Policy, 39, 117-125
    Lim, J.H., Stratopoulos, T. C., & Wirjanto, T. S. (2012). Role of IT executives in the firm's ability to achieve competitive advantage through IT capability. International Journal of Accounting Information Systems, 13, 21-40.
    Lin, C.-J., & Wu, W.-W. (2008). A causal analytical method for group decision-making under fuzzy environment. Expert Systems with Applications, 34, 205-213.
    Lin, Q.-L., Liu, L., Liu, H.-C., & Wang, D.-J. (2013). Integrating hierarchical balanced scorecard with fuzzy linguistic for evaluating operating room performance in hospitals. Expert Systems with Applications, 40, 1917-1924.
    Lin, R.-J. (2013). Using fuzzy DEMATEL to evaluate the green supply chain management practices. Journal of Cleaner Production, 40, 32-39.
    Lin, Y. H., Lee, P. C., & Chang, T. P. (2009). Practical expert diagnosis model based on the grey relational analysis technique. Expert Systems with Applications, 36, 1523-1528.
    Lin, Y.-H. & Tseng, M.-L. (2014). Assessing the competitive priorities within sustainable supply chain management under uncertainty. Journal of Cleaner Production, in press.
    Linke, B. S., Corman, G. J., Dornfeld, D. A., & Tönissen, S. (2013). Sustainability indicators for discrete manufacturing processes applied to grinding technology. Journal of Manufacturing Systems, 32, 556–563.
    Linton, J. D., Klassen, R., & Jayaraman, V. (2007). Sustainable supply chains: An introduction. Journal of Operations Management, 25, 1075-1082.
    Liou, J., & Tzeng, G.-H. (2007). A non-additive model for evaluating airline service quality. Journal of Air Transport Management, 13, 131-138.
    Liu, G. (2014). Development of a general sustainability indicator for renewable energy systems: A review. Renewable and Sustainable Energy Reviews, 31, 611-621.
    Liu, S., Kasturiratne, D. & Moizer, J. (2012). A hub-and-spoke model for multi-dimensional integration of green marketing and sustainable supply chain management. Industrial Marketing Management, 41, 581-588.
    Lockamy, A., & McCormack, K. (2009). Analyzing risks in supply networks to facilitate outsourcing decisions. International Journal of Production Research, 48, 593-611.
    Lozano, R. (2007). Collaboration as a pathway for sustainability. Sustainable Development, 16(6), 370-381.
    Lozano, R. (2008). Developing collaborative and sustainable organizations. Journal of Cleaner Production, 16, 499-509.
    Lu, L., Wu, C. & Kuo, T. (2007). Environmental principles applicable to green supplier evaluation by using multi-objective decision analysis. International Journal of Production Research, 45, 49-66.
    Manuj, I., & Mentzer, J. T. (2008). Global supply chain risk management strategies. International Journal of Physical Distribution & Logistics Management, 38, 192-223.
    Markus, L. H., Cooper-Thomas, H. D., & Allpress, K. N. (2005). Confounded by competencies? An evaluation of the evolution and use of competency models. New Zealand Journal of Psychology, 34, 117-126.
    Marnika, E., Christodoulou, E., & Xenidis, A. (2015). Sustainable development indicators for mining sites in protected areas: Tool development, ranking and scoring of potential environmental impacts and assessment of management scenarios. Journal of Cleaner Production, 101, 59-70.
    Matos, S. & Hall, J. (2007). Intergrating sustainable development in the supply chain: The case of life cycle assessment in oil and gas and agricultural biotechnology. Journal of Operations Management, 25, 1083-1102.
    Matos, S. & Silvestre, B., (2013). Managing stakeholder relations when developing sustainable business models: The case of the Brazilian energy sector. Journal of Cleaner Production, 45, 61- 73.
    Matus, K. J. M., Xiao, X. & Zimmerman, J. B. (2012). Green chemistry and green engineering in China: Drivers, policies and barriers to innovation. Journal of Cleaner Production, 32, 193-203.
    McEvily, B. & Zaheer, A. (2004). Bridging ties: A source of firm heterogeneity in competitive capabilities. Strategic Management Journal, 20, 1133-1156.
    McFadzean, E., O'Loughlin, A., & Shaw, E. (2005). Corporate entrepreneurship and innovation part 1: The missing link. European Journal of Innovation, 8, 350- 372.
    McGrath, H. & O'Toole, T. (2014). A cross-cultural comparison of the network capability development of entrepreneurial firms. Industrial Marketing Management, 43, 897-910.
    Meadows, J., Herbohn, J. & Emtage, N. (2014). Engaging Australian small-scale landowners in natural resource management programmes - perceptions, past experiences and policy implications. Land Use Policy, 36, 618-627.
    Memon, M. S., Lee, Y. H., & Mari, S. I. (2015). Group multi-criteria supplier selection using combined grey systems theory and uncertainty theory. Expert Systems with Applications, 42, 7951-7959.
    Michailova, S. & Zhan, W. (2014). Dynamic capabilities and innovation in MNC subsidiaries. Journal of World Business, in press.
    Milman, A., & Short, A. (2008). Incorporating resilience into sustainability indicators: An example for the urban water sector. Global Environmental Change, 18, 758-767.
    Montabon, F., Melnyk, S., Sroufe, R. & Calantone, R. (2000). ISO14000: Assessing its perceived impact on corporate performance. Journal of Supply Chain Management, 41, 23-35.
    Morali, O. & Searcy, C. (2013). A review of sustainable supply chain management practices in Canada. Journal of Business Ethics, 117, 635-658.
    Myers, M. B. (2004). Implications of pricing strategy-venture strategy congruence: An application using optimal models in an international context. Journal of Business Research, 57, 591-600.
    Nadler, D. A., & Tushman, M. L. (1980). A model for diagnosing organizational behavior. Organizational Dynamics, 9, 35-51.
    Nativi, S., Mazzetti, P., Santoro, M., Papeschi, F., Craglia, M., & Ochiai, O. (2015). Big data challenges in building the global earth observation system of systems. Environmental Modelling and Software, 68, 1-26.
    Nobre, F. S., Walker, D., & Harris, R. J. (2012). Technological, managerial and organizational core competencies: Dynamic innovation and sustainable development. Hershey, PA,IGI Global. USA
    Nooraie, S. V., & Mellat Parast, M. (2015). A multi-objective approach to supply chain risk management: Integrating visibility with supply and demand risk. International Journal of Production Economics, 161, 192-200.
    Noorderhaben, N. (1995). Strategic decision making. UK: Addison-Wesley.
    Nybakk, E. (2012). Learning orientation, innovativeness and financial performance in traditional manufacturing firms: A higher-order structural equation model. International Journal of Innovation Management, 16, 1-33.
    O’Connor, K. M., & Gladstone, E. (2015). How social exclusion distorts social network perceptions. Social Networks, 40, 123-128.
    Oke, A. (2007). Innovation types and innovation management practices in service companies. International Journal of Operations & Production Management, 7, 564-587.
    Oltra, V. & Jean, M. S. (2005). The dynamics of environmental innovations: Three stylised trajectories of clean technology. Economics of Innovation and New Technology, 14, 189-212.
    Olugu, E., Wong, K., & Shaharoun, A. (2011). Development of key performance measures for the automobile green supply chain. Resources, Conservation and Recycling, 55, 567-579.
    Onat, N., & Bayar, H. (2010). The sustainability indicators of power production systems. Renewable and Sustainable Energy Reviews, 14, 3108-3115.
    Onsel, S., Ulengin, F. & Kabak, O. (2008). A cluster-based approach for the innovation assessment of countries. Engineering Management Conference, Europe, IEEE International, 1-5.
    Ou, C.-H., & Liu, W.-H. (2010). Developing a sustainable indicator system based on the pressure–state–response framework for local fisheries: A case study of gungliau, taiwan. Ocean and Coastal Management, 53, 289-300.
    Pagell, M., & Wu, Z. (2009). Building a more complete theory of sustainable supply chain management using case studies of 10 exemplars. Journal of supply chain management, 45, 37-56.
    Pantano, E. & Viassone, M. (2012). Consumers' expectation of innovation: Shift retail strategies for more attractive points of sale. International Journal of Digital Content Technology and its Application, 16, 455-461.
    Pavlou, P. A. & El Sawy, O. A. (2011). Understanding the Elusive Black Box of Dynamic Capabilities. Decision Sciences, 42, 239-273.
    Peck, H. (2005). Drivers of supply chain vulnerability: An integrated framework. International Journal of Physical Distribution & Logistics Management, 35, 210-232.
    Peck, H. (2006). Rconciling supply chain vulnerability, risk and supply chain management. International Journal of Logistics Research and Applications, 9, 127-142.
    Perotti, S., Zorzini, M., Cagno, E., & Micheli, G. J. (2012). Green supply chain practices and company performance: The case of 3PLs in Italy. International Journal of Physical Distribution & Logistics Management, 42, 640-672.
    Perotto, E., Canziani, R., Marchesi, R., & Butelli, P. (2008). Environmental performance, indicators and measurement uncertainty in EMS context: A case study. Journal of Cleaner Production, 16, 517-530.
    Petrini, M., & Pozzebon, M. (2009). Managing sustainability with the support of business intelligence: Integrating socio-environmental indicators and organisational context. The Journal of Strategic Information Systems, 18, 178-191.
    Phillips, P.S., Tudor, T.L., Bird, H. & Bates, M.B. (2011). A critical review of a key Waste Strategy initiative in England: Zero Waste Places Projects 2008-2009. Resource Conservation Recycling, 55, 335-343.
    Pourdehnad, G. (2007). Synthetic (integrative) project management, an idea whose time has come. Business Strategy Series Journal, 8, 426-434.
    Powell, W. W., Koput, K. W., & Smith-Doerr, L. (1996). Interorganizational collaboration and the locus of innovation: Networks of learning in biotechnology. Administrative Science Quarterly, 41, 116-145.
    Prno, J. & Scott Slocombe, D. (2012). Exploring the origins of “social license to operate” in the mining sector: Perspectives from governance and sustainability theories. Resources Policy, 37, 346-357.
    Rabelo, L., & Hughes Speller Jr, T. (2005). Sustaining growth in the modern enterprise: A case study. Journal of Engineering and Technology Management, 22, 274-290.
    Rahdari, A. H., & Anvary Rostamy, A. A. (2015). Designing a general set of sustainability indicators at the corporate level. Journal of Cleaner Production, in press.
    Rahman, S., & Subramanian, N. (2012). Factors for implementing end-of-life computer recycling operations in reverse supply chains. International Journal of Production Economics, 140, 239-248.
    Ranganathan, J. (1998). Sustainability rulers: Measuring corporate environmental and social performance. World Resources Institute Washington. Retrieved from Http://Linkinghub.Elsevier.Com/Retrieve/Pii/S0278425498100121
    Rao, P. (2005). The greening of suppliers - in the South East Asian context. Journal of Cleaner Production, 13, 935-945.
    Rao, P., & Holt, D. (2005). Do green supply chains lead to competitiveness and economic performance? International Journal of Operations & Production Management, 25, 898-916.
    Ratnasingam, P. (2006). Perceived risks in supply chain management e-collaboration. Journal of Internet Commerce, 5, 105–124.
    Reed, M. S., Fraser, E. D. G., & Dougill, A. J. (2006). An adaptive learning process for developing and applying sustainability indicators with local communities. Ecological Economics, 59, 406–418.
    Rhee, J., Park, T. & Lee, D.H. (2010). Drivers of innovativeness and performance for innovative SMEs in South Korea: Mediation of learning orientation. Technovation, 30, 65-75.
    Roberts, D. (2006). How rising wages are changing the game in china. Business Week Online Edition, March, http://www.businessweek.com.
    Romero, J. C., & Linares, P. (2014). Exergy as a global energy sustainability indicator. a review of the state of the art. Renewable and Sustainable Energy Reviews, 33, 427-442.
    Russo, M. V. (2009). Explaining the impact of ISO 14001 on emission performance: A dynamic capabilities perspective on process and learning. Business Strategy and the Environment, 18, 307-319.
    Salmon, P.M., McClure, R. & Stanton, N.A. (2012). Road transport in drift? Applying contemporary systems thinking to road safety. Safety Science, 50, 1829-1838.
    Salunke, S., Weerawardena, J. & McColl-Kennedy, J. R. (2011). Towards a model of dynamic capabilities in innovation-based competitive strategy: Insights from project-oriented service firms. Industrial Marketing Management, 40, 1251-1263.
    Samuel, V. B., Agamuthu, P., & Hashim, M. A. (2013). Indicators for assessment of sustainable production: A case study of the petrochemical industry in Malaysia. Ecological Indicators, 24, 392-402.
    Sanderson, S. W. & Simons, K. L. (2014). Light emitting diodes and the lighting revolution: The emergence of a solid-state lighting industry. Research Policy, 43, 1730-1746.
    Sarkis, J. (1998). Evaluating environmentally conscious business practices. European Journal of Operational Research, 107, 159-174.
    Sarkis, J. (2003). A strategic decision framework for green supply chain management. Journal of Cleaner Production, 11, 397-409.
    Sarkis, J., Gonzalez-Torre, P. & Adenso-Diaz, B. (2010). Stakeholder pressure and the adoption of environmental practices: The mediating effect of training. Journal of Operations Management, 28, 163-176.
    Sarkis, J., Zhu, Q., & Lai, K.-H. (2011). An organizational theoretic review of green supply chain management literature. International Journal of Production Economics, 130, 1-15.
    Schaltegger, S. & Wagner, M. (2011). Sustainable entrepreneurship and sustainability innovation: Categories and interactions. Business Strategy Environment, 20, 222-237.
    Schiederig, T., Tietze, F. & Herstatt, C. (2012). Green innovation in technology and innovation management - an exploratory literature review. R&D Management, 42, 180-192.
    Schoenherr, T. (2012). The role of environmental management in sustainable business development: A multi-country investigation. International Journal of Production Economics, 140, 116-128.
    Seuring, S. & Müller, M. (2008). From a literature review to a conceptual framework for sustainable supply chain management. Journal of Cleaner Production, 16, 1699-1710.
    Seuring, S. (2013). A review of modeling approaches for sustainable supply chain management. Decision Support Systems, 54, 1513-1520.
    Sharma, S., & Vredenburg, H. (1998). Proactive corporate environmental strategy and the development of competitively valuable organizational capabilities. Strategic Management Jounal, 19, 729-753.
    Shen, L., Olfat, L., Govindan, K., Khodaverdi, R., & Diabat, A. (2013). A fuzzy multi criteria approach for evaluating green supplier's performance in green supply chain with linguistic preferences. Resources, Conservation and Recycling, 74, 170-179.
    Sheu, J.-B., & Chen, Y. J. (2012). Impact of Government Finanical Intervention on Competition among Green Supply Chains. International Journal of Production Economics, 138, 201-213.
    Shuen, A., Feiler, P. F. & Teece, D. J. (2014). Dynamic capabilities in the upstream oil and gas sector: Managing next generation competition. Energy Strategy Reviews, 3, 5-13.
    Sierzchula, W., Bakker, S., Maat, K. & van Wee, B. (2012). Technological diversity of emerging eco-innovations: A case study of the automobile industry. Journal of Cleaner Production, 37, 211-220.
    Sodhi, M. S. (2005). Managing demand risk in tactical supply chain planning for a global consumer electronics company. Production and Operations Management, 14, 69-79.
    Sodhi, M. S., Son, B.-G., & Tang, C. S. (2012). Researchers’ perspectives on supply chain risk management. Production and Operations Management, 21, 1-13.
    Soosay, C. A., Hyland, P. W., & Ferrer, M. (2008). Supply chain collaboration: Capabilities for continuous innovation. Supply Chain Management: An International Journal, 13, 160-169.
    Speier, C., Whipple, J. M., Closs, D. J., & Voss, M. D. (2011). Global supply chain design considerations: Mitigating product safety and security risks. Journal of Operations Management, 29, 721-736.
    Spencer, J. (2003). Firms’ knowledge-sharing strategies in the global innovation system: Empirical evidence from the flat panel display industry. Strategic Management Journal, 24, 217-233.
    Srivastava, S. K. (2007). Green supply-chain management: A state-of-the-art literature review. International Journal of Management Reviews, 9, 53-80.
    Starkl, M., Brunner, N., López, E. & Martínez-Ruiz, J.L. (2013). A planning-oriented sustainability assessment framework for peri-urban water management in developing countries. Water Resources, 47, 7175-7183.
    Su, C.-M., Horng, D.-J., Tseng, M.-L., Chiu, A. S. F., Wu, K.-J., & Chen, H.-P. (2015). Improving sustainable supply chain management using a novel hierarchical grey-dematel approach. Journal of Cleaner Production, in press.
    Svensson, G. (2007). Aspects of sustainable supply chain management (SSCM): Conceptual framework and empirical example. Supply Chain Management: An International Journal, 12, 262-266.
    Swan, J., Goussevskaia, A., Newell, S., Robertson, M., Bresnen, M. & Obembe, A. (2007). Modes of organizing biomedical innovation in the UK and US and the role of integrative and relational capabilities. Research Policy, 36, 529-547.
    Tang, C. S. (2006). Robust strategies for mitigating supply chain disruptions. International Journal of Logistics Research and Applications, 9, 33-45.
    Tang, O., & Nurmaya Musa, S. (2011). Identifying risk issues and research advancements in supply chain risk management. International Journal of Production Economics, 133, 25-34.
    Tazelaar, F., & Snijders, C. (2013). Operational risk assessments by supply chain professionals: Process and performance. Journal of Operations Management, 31, 37-51.
    Teece, D. J. (2007). Explicating dynamic capabilities: The nature and microfoundations of (sustainable) enterprise performance. Strategic Management Journal, 28, 1319-1350.
    Teece, D. J., Pisano, G. & Shuen, A. (1997). Dynamic capabilities and strategic management. Strategic Management Journal, 18, 509-533
    Testa, F., & Iraldo, F. (2010). Shadows and lights of GSCM (Green Supply Chain Management): Determinants and effects of these practices based on a multi-national study. Journal of Cleaner Production, 18, 953-962.
    Thierry, M., Salomon, M., Van Nuren, J., & Van Wassenhove, L. (1995). Strategic issues in product recovery management. California Management Review, 37, 114-135.
    Triguero, A., Moreno-Mondéjar, L. & Davia, M. A. (2013). Drivers of different types of eco-innovation in European SMEs. Ecological Economics, 92, 25-33.
    Trkman, P., & Mccormack, K. (2009). Supply chain risk in turbulent environments - a conceptual model for managing supply chain network risk. International Journal of Production Economics, 119, 247-258.
    Tsai, W.-H., & Hung, S.-J. (2009). Treatment and recycling system optimisation with activity-based costing in weee reverse logistics management: An environmental supply chain perspective. International Journal of Production Research, 47, 5391-5420.
    Tseng, C., Kuo, H. & Chou, S. (2008). Configuration of innovation and performance in the service industry: Evidence from the Taiwanese hotel industry. Service Industries Journal, 28, 1015-1028.
    Tseng, M. L. (2010). Using linguistic preferences and grey relational analysis to evaluate the environmental knowledge management capacity. Expert Systems with Applications, 37, 70-81.
    Tseng, M., Wu, W., Lin, Y., & Liao, C. (2008). An exploration of relationships between environmental practice and manufacturing performance using the PLS path modeling. WSEAS Transactions on Environment and Development, 4, 487-502.
    Tseng, M.-L. (2009). A causal and effect decision making model of service quality expectation using grey-fuzzy dematel approach. Expert Systems with Applications, 36, 7738-7748.
    Tseng, M.-L. (2010). Implementation and performance evaluation using the fuzzy network balanced scorecard. Computers & Education, 55, 188-201.
    Tseng, M.-L. (2011). Using hybrid mcdm to evaluate the service quality expectation in linguistic preference. Applied Soft Computing, 11, 4551-4562.
    Tseng, M.-L., & Chiu, A. S. (2013). Evaluating firm's green supply chain management in linguistic preferences. Journal of Cleaner Production, 40, 22-31.
    Tseng, M.-L., & Lin, Y. (2009). Application of fuzzy dematel to develop a cause and effect model of municipal solid waste management in metro manila. Environmental Monitoring and Assessment, 158, 519-533.
    Tseng, M.-L., Chen, Y.-H., & Geng, Y. (2012). Integrated model of hot spring service quality perceptions under uncertainty. Applied Soft Computing, 12, 2352-2361.
    Tseng, M.-L., Chiang, J., & Lan, L. (2009). Selection of optimal supplier in supply chain management strategy with analytic network process and choquet integral. Computers & Industrial Engineering, 57, 330-340.
    Tseng, M.-L., Lin, Y.-H., Tan, K., Chen, R.-H., & Chen, Y.-H. (2014). Using TODIM to evaluate green supply chain practices under uncertainty. Applied Mathematical Modelling, 38, 2983-2995.
    Tseng, M.-L., Wang, R., Chiu, A.S.F., Geng, Y., & Lin, Y.-H. (2013). Improving performance of green innovation practices in uncertainty. Journal of Cleaner Production , 40, 71-82
    Tzeng, G.-H., Chiang, C.-H., & Li, C.-W. (2007). Evaluating intertwined effects in e-learning programs: A novel hybrid MCDM model based on factor analysis and DEMATEL. Expert Systems with Applications, 32, 1028-1044.
    Vachon, S. & Mao, Z. (2008). Linking supply chain strength tosustainable development: A country-level analysis. Journal of Cleaner Production, 16, 1552-1560.
    Vachon, S., & Klassen, R. D. (2006). Extending green practices across the supply chain: The impact of upstream and downstream integration. International Journal of Operations & Production Management, 26, 795-821.
    Vahdani, B., Tavakkoli-Moghaddam, R., Mousavi, M. S. & Ghodratnama, A. (2013). Soft computing based on new interval-valued fuzzy modified multi-criteria decision-making method. Applied Soft Computing, 13, 165-172.
    Van de Ven, A. & Engleman, R. (2004). Central problems in managing corporate innovation and entrepreneurship. Advances in Entrepreneurship, Firm Emergence and Growth 7, 47-72.
    Van Kleef, J.A.G. & Room, N.J. (2007). Developing capabilities and competencies for sustainable business management as innovation: A research agenda. Journal Cleaner Production, 15, 38 - 41.
    Vargo, S. & Lusch, R. (2008). Service-dominant logic: Continuing the evolution. Journal of the Academy of Marketing Science, 36, 1-10.
    Veleva, V., Hart, M., Greiner, T., & Crumbley, C. (2001). Indicators of sustainable production. Journal of Cleaner Production, 9, 447–452.
    Veryzer, R.W. (1998). Discontinuous innovation and new product development process. Journal of Acceptance of Innovation Management, 15, 304-321.
    Veugelers, R. (2012). Which policy instruments to induce clean innovating? Research Policy, 41(10), 1770-1778.
    Violeta, S. & Gheorghe, I. (2009). The green strategy mix – a new marketing approach. Knowledge Management and Innovation in Advancing Economics - Analysis, 1-3, 1344-1347.
    Vlajic, J., Vorst, J. & Haijema, R. (2012). A framework for designing robust food supply chains. International Journal of Production Economics, 137, 176-189.
    Volberda, H. W., Van Den Bosch, F. A. J., & Heij, C. V. (2013). Management innovation: Management as fertile ground for innovation. European Management Review, 10, 1-15.
    Voola, R. & O'Cass, A. (2010). Implementing competitive strategies: The role of responsive and proactive market orientations. European Journal of Marketing, 44, 245-266.
    Walker, H., Sisto, L., & McBain, D. (2008). Drivers and barriers to environmental supply chain management practices: Lessons from the public and private sectors. Journal of Purchasing and Supply Management, 14, 69-85.
    Walker, R.M., Damanpour, F. & Devece, C.A. (2011). Management innovation and organizational performance: The mediating effect of performance management. Journal of Public Administration Research Theory, 21, 367-386.
    Wang, C. L. & Ahmed, P. K. (2007). Dynamic capabilities: A review and research agenda. International Journal of Management Reviews, 9, 31-51.
    Wang, M., & Chang,, T. (1995). Tool steel materials selection under fuzzy. Fuzzy Sets and Systems, 72, 263-270.
    Wang, X., Chan, H., Yee, R. W., & Diaz-Rainey, I. (2012). A two-stage fuzzy-AHP model for risk assessment of implementing green initiatives in the fashion supply chain. International Journal of Production Economics, 135, 595-606.
    Weber, T.C. & Allen, W.L. (2010). Beyond on-site mitigation: An integrated multiscaleapproach to environmental mitigation and stewardship for transportation projects. Landscape Urban Planing, 96, 240-256.
    Weerawardena, J. & Mavondo, F. T. (2011). Capabilities, innovation and competitive advantage. Industrial Marketing Management, 40, 1220-1223.
    Wei, G.-U. (2010). GRA method for multiple attribute decision making with incomplete weight information in intuitionistic fuzzy setting. Knowledge-Based Systems, 23, 243-247.
    Winter, S. G. (2003). Understanding dynamic capabilities. Strategic Management Journal, 24, 991-995.
    Wolf, J. (2014). The relationship between sustainable supply chain management, stakeholder pressure and corporate sustainability performance. Journal of Business Ethics, 19, 317-328.
    Wong, J.-K. W., & Zhou, J. (2015). Enhancing environmental sustainability over building life cycles through green BIM: A review. Automation in Construction, 57, 156-165.
    Wong, Y.-P., Tseng, M.L., Tan, K. (2014). A business process management capabilities perspective on organization performance. Total Quality Management & Business Excellence, 25, 602-617.
    Wood, D.-J., & Gray, B. (1991). Toward a comprehensive theory of collaboration. The Journal of Applied Behavioral Science, 27, 139-162.
    World Tourism Organization (2014). UNWTO tourism highlights. Retrieved Fubuary 15, 2015, from http://mkt.unwto.org/publication/unwto-tourism-highlights-2014-edition
    Wu, G.-C., Ding, J.-H., & Chen, P.-S. (2012). The effects of GSCM drivers and institutional pressures on GSCM practices in Taiwan’s textile and apparel industry. International Journal of Production Economics, 135, 618-636.
    Wu, K.-J., Liao, C.-J., Tseng, M.-L. & Chiu, A. S. F. (2015). Exploring decisive factors in green supply chain practices under uncertainty. International Journal of Production Economics, 159, 147-157.
    Wu, L.-Y. (2006). Resources, dynamic capabilities and performance in a dynamic environment: Perceptions in Taiwanese IT enterprises. Information & Management, 43, 447-454.
    Wu, L.-Y. (2007). Entrepreneurial resources, dynamic capabilities and start-up performance of Taiwan's high-tech firms. Journal of Business Research, 60, 549-555.
    Wu, L.Y. (2010). Which companies should implement management innovation? A commentary essay. Journal of Business Research, 63, 321- 323.
    Wu, W.-W. (2012). Segmenting critical factors for successful knowledge management implementation using the fuzzy DEMATEL method. Applied Soft Computing, 12, 527-535.
    Wu, W.-W., & Lee, Y.-T. (2007). Developing global managers' competencies using the fuzzy DEMATEL method. Expert Systems with Applications, 32, 499-507.
    Wu, Z., & Pagell, M. (2011). Balancing priorities: Decision-making in sustainable supply chain management. Journal of Operations Management,29, 577-590.
    Xiao, Z., Xia, S., Gong, K., & Li, D. (2012). The trapezoidal fuzzy soft set and its application in MCDM. Applied Mathematical Modelling, 36, 5844-5855.
    Xu, L., Mathiyazhagan, K., Govindan, K., Noorul Haq, A., Ramachandran, N., & Ashokkumar, A. (2013). Multiple comparative studies of Green Supply Chain Management: Pressures. Resources, Conservation and Recycling, 78, 26-35.
    Yang, Y., Narayanan, V. K. & Zahra, S. (2009). Developing the selection and valuation capabilities through learning: The case of corporate venture capital. Journal of Business Venturing, 24, 261-273.
    Young, W. & Tilley, F. (2006). Can businesses move beyond efficiency? The shift toward effectiveness and equity in the corporate sustainability debate. Business Strategy and the Environment, 15, 402-415.
    Yusoff, W. F. W., & Armstrong, A. (2012). What competencies should directors possess? malaysia perspective. International Journal of Business and Management, 7, 142-149
    Zadeh, L. (1965). Fuzzy sets. Information and Control, 8, 338-353.
    Zahra, S. A. & George, G. (2002). The net-enabled business innovation cycle and the evolution of dynamic capabilities. Information Systems Research, 13, 147-150.
    Zahra, S. A. (2005). Entrepreneurial risk taking in family firms. Family Business Review, 18, 23-40.
    Zahra, S. A., Sapienza, H. J. & Davidsson, P. (2006). Entrepreneurship and dynamic capabilities: A review, model and research agenda. Journal of Management Studies, 43, 917-955.
    Zailani, S., Jeyaraman, K., Vengadasan, G. & Premkumar, R. (2012). Sustainable supply chain management (SSCM) in malaysia: A survey. International Journal of Production Economics, 140, 330-340.
    Zhai, L.-Y., Khoo, L.-P. & Zhong, Z.-W. (2009). Design concept evaluation in product development using rough sets and grey relation analysis. Expert Systems with Applications, 36, 7072-7079.
    Zhang, S. F., Liu, S. Y., Zhai, R. H. (2011). An extended gra method for mcdm with interval-valued triangular fuzzy assessments and unknown weights. Computers and Industrial Engineering, 61, 1336-1341.
    Zhou, K.Z., Brown, J.R., Dev, C.S. & Agarwal, S. (2007). The effects of customer and competitor orientations on performance in global markets: A contingency analysis. Journal of International Business Studies, 38(2), 303-319.
    Zhu, Q. & Sarkis, J. (2004). Relationships between operational practices and performance among early adopters of green supply chain management practices in chinese manufacturing enterprises. Journal of Operations Management, 22, 265-289.
    Zhu, Q., & Sarkis, J. (2006). An inter-sectoral comparison of green supply chain management in china: Drivers and practices. Journal of Cleaner Production, 14, 472-486.
    Zhu, Q., & Sarkis, J. (2007). The moderating effects of institutional pressures on emergent green supply chain practices and performance. International Journal of Production Research, 45, 4333-4355.
    Zhu, Q., Cordeiro, J. & Sarkis, J. (2013). Institutional pressures, dynamic capabilities and environmental management systems: Investigating the ISO 9000 - environmental management system implementation linkage. Journal of Environmental Management, 114, 232-242.
    Zhu, Q., Sarkis, J. & Lai, K.-h. (2013). Institutional-based antecedents and performance outcomes of internal and external green supply chain management practices. Journal of Purchasing and Supply Management, 19, 106-117.
    Zhu, Q., Sarkis, J., & Geng, Y. (2005). Green supply chain management in china: Pressures, practices and performance. International Journal of Operations & Production Management, 25, 449-468.
    Zhu, Q., Sarkis, J., & Lai, K.-h. (2007). Green supply chain management: Pressures, practices and performance within the chinese automobile industry. Journal of Cleaner Production, 15, 1041-1052.
    Zhu, Q., Sarkis, J., & Lai, K.-h. (2008). Green supply chain management implications for closing the loop. Transportation Research part E: Logistics and
    指導教授/口試委員
  • 廖慶榮 - 指導教授
  • 郭人介 - 委員
  • 江行全 - 委員
  • 喻奉天 - 委員
  • 吳建瑋 - 委員
  • 曾明朗 - 委員
  • 繳交日期 2016-01-14


    基本檢索 | 進階查詢 | 瀏覽檢索 | 檢索歷史 | 主頁

    如有任何問題請與國立臺灣科技大學圖書館聯繫